Working Principle of a Synchronous Motor

Working Principle of a Synchronous Motor

Posted on

The working principle of a synchronous motor is based on the principle of magnetic locking between stator and rotor poles. Electrical motor in general is an electro-mechanical device that converts energy from electrical domain to mechanical domain. Based on the type of input we have classified it into single phase and 3 phase motors. Among 3 phase motors, we mostly sue induction motors and synchronous motors.

When three-phase electric conductors are placed in certain geometrical positions (In certain angle from one another), then an electrical field is generated. Now the rotating magnetic field rotates at a certain speed, that speed is called synchronous speed. Now if an electromagnet is present in this rotating magnetic field, the electromagnet is magnetically locked with this rotating magnetic field and rotates with the same speed of rotating field.

Working Principle of a Synchronous Motor

Synchronous motors is called so because the speed of the rotor of this motor is the same as the rotating magnetic field. It is a fixed speed motor because it has only one speed, which is synchronous speed, or in other words, it is in synchronism with the supply frequency. Synchronous speed is given by:


  • f = supply frequency and
  • p = no. of poles

Construction of Synchronous Motor

Usually, its construction is almost similar to that of a 3 phase induction motor, except the fact that here we supply DC to the rotor, the reason of which we shall explain later.

Now, let us first go through the basic construction of this type of motor. From the above picture, it is clear that how do we design this type of machine. We apply three phase supply to the stator and DC supply to the rotor.

Main Features of Synchronous Motors

  1. Synchronous motors are inherently not self starting. They require some external means to bring their speed close to synchronous speed to before they are synchronized.
  2. The speed of operation of is in synchronism with the supply frequency and hence for constant supply frequency they behave as constant speed motor irrespective of load condition
  3. This motor has the unique characteristics of operating under any electrical power factor. This makes it being used in electrical power factor improvement.

Principle of Operation Synchronous Motor

Synchronous motor is a doubly excited machine, i.e., two electrical inputs are provided to it. Its stator winding which consists of a We provide three-phase supply to three-phase stator winding, and DC to the rotor winding.

The 3 phase stator winding carrying 3 phase currents produces 3 phase rotating magnetic flux. The rotor carrying DC supply also produces a constant flux. Considering the 50 Hz power frequency, from the above relation we can see that the 3 phase rotating flux rotates about 3000 revolutions in 1 min or 50 revolutions in 1 sec.

At a particular instant rotor and stator poles might be of the same polarity (N-N or S-S) causing a repulsive force on the rotor and the very next instant it will be N-S causing attractive force.

But due to the inertia of the rotor, it is unable to rotate in any direction due to that attractive or repulsive forces, and the rotor remains in standstill condition. Hence a synchronous motor is not self-starting. Here we use some mechanical means which initially rotates the rotor in the same direction as the magnetic field to speed very close to synchronous speed.

On achieving synchronous speed, magnetic locking occurs, and the synchronous motor continues to rotate even after removal of external mechanical means.

Methods of Starting of Synchronous Motor

Motor starting with an external prime Mover: Synchronous motors are mechanically coupled with another motor. It could be either 3 phase induction motor or DC shunt motor.

Here, we do not apply DC excitation initially. It rotates at speed very close to its synchronous speed, and then we give the DC excitation. After some time when magnetic locking takes place supply to the external motor is cut off.

Damper winding: In this case, the synchronous motor is of salient pole type, additional winding is placed in rotor pole face. Initially, when the rotor is not rotating, the relative speed between damper winding and rotating air gap flux is large and an emf is induced in it which produces the required starting torque.

As speed approaches synchronous speed, emf and torque are reduced and finally when magnetic locking takes place; torque also reduces to zero. Hence in this case synchronous motor first runs as three phase induction motor using additional winding and finally it is synchronized with the frequency.

Synchronous Motor

Application of Synchronous Motor

  1. Synchronous motor having no load connected to its shaft is used for power factor improvement. Owing to its characteristics to behave at any electrical power factor, it is used in power system in situations where static capacitors are expensive.
  2. Synchronous motor finds application where operating speed is less (around 500 rpm) and high power is required. For power requirement from 35 kW to 2500 KW, the size, weight and cost of the corresponding three phase induction motor is very high. Hence these motors are preferably used. Ex- Reciprocating pump, compressor, rolling mills etc.

Working Principle of a Synchronous Motor Conclusion

After going through the above portion of synchronous motor we can now establish working principle of a synchronous motor. I hope you enjoy when reading this article, thank you.